Technical Specifications
SPL
111 dB
Amplifier Power
150 W Bass (Class D) + 120 W Midrange (Class D) + 90 W Treble (Class AB)
Frequency Response
32 Hz - 35 kHz ("-6 dB")
Accuracy of Frequency Response
± 1.5 dB (38 Hz - 20 kHz)
Driver Dimensions
⌀ 19 mm Treble + ⌀ 120 mm Midrange + 2 x H 100 x W 215 mm Bass (view in inches)
Dimensions
H 452 x W 286 x D 278 mm, with Iso-Pod™ (view in inches)
Weight
19 kg / 41.9 lb
Connections
1 x XLR Analog Input
1 x XLR AES/EBU Input
1 x XLR AES/EBU Output
2 x RJ45 Control
8351A SAM™ Studio Monitor
Technical Specifications
A revolution in three-way monitor design, the 8351 boasts a unique look, a compact size and a performance that has to be heard to be believed.
System Specifications
Frequency Response
38 Hz - 20 kHz (± 1.5 dB)
Low cutoff -6dB
32 Hz
High cutoff -6dB
35 kHz
SPL
Peak SPL Maximum peak SPL output per pair on top of console at 1 m with music material.
≥121 dB
Short term max SPL Maximum short term sine wave SPL output at 1 m on axis in half space, averaged as specified (from 100 Hz to 3 kHz).
≥111 dB
Self-generated noise
Self-generated noise Self generated noise level in free field at 1 m on axis (A-weighted)
≤5 dB SPL
Weight
Weight19 kg (41.9 lb)
Dimensions
Height
433 mm
Height with Iso-Pod
452 mm
Width
286 mm
Depth
278 mm
Enclosure
Enclosure material
Die cast aluminium
Enclosure type
Reflex port
Drivers
Driver type
Coaxial
Coaxial aluminium dome
Diameter
19 mm
Driver type
Coaxial
Coaxial aluminium cone
Diameter
120 mm
Driver type
Racetrack
Dual oval-shaped Acoustically Concealed Woofers
Count
2
Width
215 mm
Height
100 mm
Directivity
Harmonic distortion
Group delay
The latency at high frequencies from the input to the acoustic output, measured in the analog input:
Extended Phase Linearity in GLM set to OFF
4.9 ms
In Genelec performance graphics, the time of converting the from an electronic input signal to the acoustic output in a Genelec monitor is described by two factors – latency and group delay. The group delay factor can be read in the graphics for a specific frequency. The total frequency-specific input-to-output delay is a sum of the latency and group delay factors. To understand the significance of this total delay, consider that moving a loudspeaker away by 1 meter creates an additional delay of about 3 ms.
Amplifier Section
Amplifiers
150 W Class D
120 W Class D
90 W Class AB
Mains voltage
100, 120, 220 or 230VAC 50/60Hz according to region
Power consumption
Idle
≤20 W
Full output
290 W
Signal processing section
Connectors
Input Analog signal input connector XLR female (10 kOhm input load impedance).
Input XLR female (conforms to IEC 60958-4)
Output XLR male (conforms to IEC 60958-4)
2 x Control Two CAT5 (RJ45) GLM Network connectors for computer control using the Genelec Loudspeaker Manager (GLM) software.